While skived sheets are ideal for thin-film applications, heavy industrial machining requires thick, solid blocks of material. PTFE Moulded Sheets (or plates) are manufactured precisely for this purpose, providing a dense, stress-free foundation for custom CNC machining.
Compression Moulding Process
PTFE moulded sheets are created by placing granular PTFE resin into a heavy-duty hydraulic press. The powder is compacted under massive pressure at room temperature to form a solid "green" preform. This preform is then carefully removed and sintered (baked) in a programmable oven at around 370°C. The slow heating and cooling cycles relieve internal stresses, resulting in a dimensionally stable sheet.
Advantages of Moulded Sheets
- Thickness Availability: Available in thicknesses from 3mm up to 100mm or more, which cannot be achieved through the skiving process.
- Machinability: The stress-free nature of sintered moulded sheets means they will not warp or distort when machined into complex shapes.
- Custom Fillers: Moulded sheets can easily be manufactured using Filled PTFE grades (like Bronze or Carbon-filled) to enhance wear resistance for structural applications.
Typical Applications
These heavy-duty sheets are the starting point for manufacturing expansion bearing pads, large diameter valve seats, heavy-duty electrical insulators, and custom manifold blocks for the chemical industry.