When an engineer needs to machine a large ring, seal, or tubular bearing, starting with a solid PTFE rod results in a massive amount of wasted material (swarf) generated from drilling out the center. PTFE Moulded Bushes (also known as moulded cylinders or thick-walled tubes) solve this problem by providing a hollow starting billet.
How They Are Made
Moulded bushes are produced using compression moulding. Granular PTFE is poured into the annular space between a steel outer mould and a solid steel inner core (mandrel). The powder is compressed to form a dense hollow cylinder, which is then sintered to achieve its final mechanical properties.
Economic and Engineering Advantages
- Significant Cost Savings: By purchasing a bush with an Inner Diameter (ID) and Outer Diameter (OD) close to your final part dimensions, you drastically reduce both material costs and machining time.
- Isotropic Properties: Compression moulding provides excellent multidirectional strength, making the bushes highly resistant to compressive loads and wear.
- Filled Grades Available: Bushes are frequently manufactured in Glass, Carbon, and Bronze-filled PTFE to create self-lubricating bearing sleeves and heavy-duty compressor rings.
Common Machined Parts
PTFE moulded bushes are the preferred starting material for manufacturing V-rings, chevron packings, large ball valve seats, rotary shaft seals, and plain bearings.