When purchasing semi-finished PTFE shapes like rods, tubes, or thick sheets, buyers are often presented with a choice between Extruded and Moulded products. Which one is right for your application?
The Compression Moulding Process
Moulding involves pouring granular PTFE powder into a steel mould, compressing it under high pressure using a hydraulic press, and then transferring the solid block to a sintering oven to bake at around 370°C.
- Best For: Producing massive, heavy-duty parts. Large diameter rods, huge thick sheets, and custom-shaped thick-walled cylinders (bushes).
- Pros: Exceptional multidirectional strength (isotropic), virtually stress-free, and very easy to produce custom Filled PTFE blends (like Carbon or Bronze-filled).
- Cons: Cannot produce continuous, endless lengths. Limited to the size of the mould.
The Ram Extrusion Process
Extrusion involves continuously feeding PTFE powder into a heated cylindrical die while a hydraulic ram repeatedly punches the material forward. The material sinters as it passes through the heated zone, emerging continuously from the other side.
- Best For: Producing long, continuous lengths of smaller diameter rods and rigid pipes.
- Pros: Ideal for automatic CNC lathes that require 2-meter or 3-meter long bar stock. Minimizes material waste during high-volume production.
- Cons: Limited to smaller diameters (usually under 150mm). Slight directional stress is introduced during extrusion.
The Verdict
If you are machining a large, heavy-duty valve seat or backing ring, buy a Moulded Bush or Rod. If you are mass-producing thousands of small O-rings on a Swiss CNC lathe, buy Extruded Rods. At Hindustan Nylons, we manufacture both to the highest international standards.